Skip to content

Sign in or create an account

New here? Enter your email. The first code makes your account.

No password. We email you a 6-digit code. A free account keeps 10 CVs and gets a few free AI actions to start.

Engineering

Electrical engineer CV examples

3 examples written for different markets. Every personal detail is taken out.Also called: power engineer, MEP electrical engineer, electrical design engineer.
XXXX XXXXX
Electrical Design and Field Engineer, MEP Projects
[email protected]+XX XXX XXX XXXXUAE
Nationality: XXXXVisa status: XXXXAvailability: XXXXDriving licence: XXXX
Professional Summary

Electrical engineer with 6 years in MEP design and site execution across residential, commercial and hospitality developments in the UAE. Experienced in low voltage design, DEWA and Civil Defence submissions, and coordination with contractors to keep projects on programme. Comfortable leading site teams through testing and commissioning and resolving design clashes before they hit the build.

Work Experience
Electrical Design Engineer
A Dubai-based MEP consultancy serving residential and hospitality developers · Dubai, UAE
  • Produced electrical schematics, single line diagrams and load schedules for 8 residential towers using AutoCAD and Revit MEP
  • Prepared DEWA load applications and substation layouts for three projects, cutting approval turnaround by around 3 weeks per submission
  • Ran clash detection sessions with HVAC and plumbing teams in Navisworks, resolving over 90 coordination issues before construction start
  • Reviewed contractor shop drawings and material submittals, rejecting non-compliant cable sizing on two occasions that would have breached IEC ratings
  • Supported tender documentation and BOQ preparation for projects with budgets up to AED 45 million
Site Electrical Engineer
A regional electrical contracting firm working on commercial fit out and villa developments · Abu Dhabi, UAE
  • Supervised installation of LV distribution boards, cable containment and lighting systems across a 200 unit villa compound
  • Coordinated testing and commissioning of generators and ATS panels, achieving zero defect handover on two consecutive projects
  • Managed a team of 12 electricians and supervisors, scheduling daily work to keep two parallel sites on programme
  • Liaised with Abu Dhabi Civil Defence and ADDC inspectors to close out fire alarm and power inspection snags ahead of handover deadlines
  • Tracked material deliveries and cable schedules, reducing site wastage on cabling by about 15% over the contract period
Junior Electrical Engineer
An industrial maintenance contractor serving manufacturing plants · Sharjah, UAE
  • Assisted senior engineers with preventive maintenance of LV switchgear, transformers and motor control centres across three factory sites
  • Carried out thermal imaging surveys on panel boards, flagging overheating connections before they caused downtime
  • Prepared as built drawings and updated single line diagrams following equipment upgrades
Education
BSc in Electrical Engineering
A UK-affiliated university campus in the UAE · Sharjah, UAE
Skills
Technical:Low voltage design, Single line diagrams, Load calculations, AutoCAD Electrical, Revit MEP, ETAP, Navisworks clash detection, Panel and switchgear testing, Cable sizing to IEC standards, Generator and ATS commissioning
Regulatory and process:DEWA submissions, Civil Defence approvals, ADDC coordination, BOQ and tender support, Shop drawing review, Site supervision
Certifications
DEWA Approved Electrical Engineer status (in progress)
Dubai Electricity and Water Authority
PMP Certification
Project Management Institute
NEBOSH IGC
NEBOSH
Languages
English
Arabic
Hindi
XXXX XXXXX
Electrical Design Engineer, MEP Building Services
[email protected]+XX XXX XXX XXXXUK
Professional Summary

Electrical engineer with 6 years in MEP design and site delivery across commercial and healthcare projects in the UK and Ireland. Experienced in low voltage distribution design, lighting and small power layouts, and Amtech/Dialux calculations, working from RIBA stage 2 through to construction and handover. Comfortable liaising with contractors, clients and building control to keep installations on programme and within budget.

Work Experience
Electrical Design Engineer · A multidisciplinary MEP consultancy serving commercial and healthcare clients
London, UK
  • Produced LV distribution, lighting and small power designs for a 12-storey office fit-out, cutting cable containment costs by 9% through route optimisation.
  • Carried out Amtech cable sizing and protection coordination studies for a 300-bed hospital extension. The studies complied with BS 7671 and HTM 06-01.
  • Ran Dialux lighting calculations for three retail and office schemes, meeting target lux levels while reducing connected load by around 15%.
  • Coordinated with structural and mechanical teams using Revit MEP to resolve clashes before issue for construction.
  • Attended site progress meetings and answered technical queries from contractors during the fit-out of a university teaching building.
  • Supported the principal designer with CDM 2015 documentation and electrical safety files for three completed projects.
Site Electrical Engineer · A regional building services contractor working on commercial new-build and refurbishment
Dublin, Ireland
  • Supervised first and second fix electrical installation on a 6,000 sqm logistics facility, keeping the electrical package on programme across an 11-month build.
  • Inspected and tested LV installations to BS 7671 and ETCI National Rules, raising snag closure rate to 95% before handover.
  • Managed a team of up to 8 electricians on site, planning daily work and checking installation quality against drawings.
  • Liaised with ESB Networks on new site connections and metering arrangements for two commercial developments.
  • Reviewed subcontractor RAMS and conducted toolbox talks, with no lost-time incidents recorded on either project.
Graduate Electrical Engineer · A building services design practice working on education and residential projects
Cork, Ireland
  • Assisted senior engineers with electrical load calculations and single line diagrams for school and apartment schemes.
  • Produced as-built drawings in AutoCAD and supported site surveys for two refurbishment projects.
  • Learned to use Amtech and Relux software under supervision. I contributed to design packages for three live projects.
Education
BEng (Hons) Electrical and Electronic Engineering
A university in Ireland · Cork, Ireland
Skills
Design and software:Amtech, Dialux, Relux, Revit MEP, AutoCAD, Protection coordination studies, Lighting design
Standards and compliance:BS 7671, ETCI National Rules, HTM 06-01, CDM 2015, Part L compliance, CIBSE guidance
Site and project:Site supervision, Snagging and testing, Subcontractor management, RAMS review, Client liaison
Certifications
IEng (working towards), Institution of Engineering and Technology
IET
18th Edition BS 7671 Wiring Regulations
City & Guilds
CSCS Card
Construction Skills Certification Scheme
Languages
English
XXXX XXXXX
Electrical Engineer, MEP Design and Field Support
[email protected]+XX XXX XXX XXXXTX
Professional Summary

Electrical engineer with 6 years designing and commissioning power distribution and lighting systems for commercial and industrial buildings. Experienced with NEC-compliant design, load calculations, and coordination studies using SKM and Revit MEP. Comfortable moving between the design desk and the job site, and known for catching conflicts before they become change orders. Authorized to work in the US.

Work Experience
Electrical Design Engineer
A mid-size MEP consulting firm serving commercial and healthcare clients · Texas, US
  • Lead electrical design for 8 to 12 concurrent commercial projects a year, including a 120,000 sq ft medical office building and a 200-room hotel renovation
  • Perform short circuit, coordination, and arc flash studies in SKM Power Tools and update one-line diagrams for permit submittal
  • Cut average design review cycle from 3 rounds to 2 by building a standard detail library reused across projects
  • Coordinate with mechanical and plumbing teams in Revit MEP to resolve clashes before issue for construction, reducing field RFIs by about 20%
  • Review contractor submittals and shop drawings for switchgear, panelboards, and lighting fixtures against spec
  • Mentor two junior designers on NEC Article 220 load calculations and panel schedule standards
Electrical Engineer
A regional industrial contractor specializing in manufacturing and warehouse facilities · Ohio, US
  • Designed power distribution for a 300,000 sq ft distribution center, including a 2000A main switchboard and 15 branch panels
  • Prepared voltage drop and conduit fill calculations for feeder runs up to 400 feet, keeping all circuits within NEC limits
  • Supported field commissioning of VFDs and motor control centers for conveyor and HVAC equipment, troubleshooting start-up faults with the controls team
  • Built panel schedules and bills of material in AutoCAD Electrical, cutting takeoff time by roughly 15%
  • Conducted site walks during rough-in and above-ceiling phases to confirm installed conditions matched design intent
Education
B.S. in Electrical Engineering
A state university in Ohio · Ohio, US
Skills
Design and Analysis:NEC compliance, Load calculations, Short circuit and arc flash studies, SKM Power Tools, AutoCAD Electrical, Revit MEP, One-line diagrams, Panel schedules
Field and Coordination:Construction administration, Submittal review, RFI resolution, Commissioning support, Switchgear and MCC startup, Cross-discipline coordination
Certifications
Professional Engineer (PE), Electrical
State of Texas
Engineer in Training (EIT)
NCEES
OSHA 30-Hour Construction Safety
OSHA
Languages
English

More CV examples by job · CV guides by country