Skip to content

Sign in or create an account

New here? Enter your email. The first code makes your account.

No password. We email you a 6-digit code. A free account keeps 10 CVs and gets a few free AI actions to start.

Engineering

Mechanical engineer CV examples

3 examples written for different markets. Every personal detail is taken out.Also called: design engineer, HVAC design engineer, MEP mechanical engineer.
XXXX XXXXX
Mechanical Engineer (HVAC/MEP Design) - Commercial and Mixed-Use Developments

[email protected]+XX XXX XXX XXXXUAE
Professional Summary

Mechanical engineer with 6 years designing and coordinating HVAC and plumbing systems for commercial towers, hotels and mixed-use developments across the UAE and Saudi Arabia. Skilled in HAP and Revit MEP, with a track record of cutting plant room footprint and energy use through better system selection. Comfortable working directly with consultants, contractors and authorities such as DEWA, Dubai Civil Defence and the Saudi Building Code.

Work Experience
MEP Mechanical Engineer
A Dubai-based MEP consultancy serving commercial and hospitality clients · UAE
  • Lead mechanical design for three hotel towers totalling 1,400 keys, covering chiller plant, AHU layout and smoke extract systems
  • Cut chiller plant room area by 18% on a 40-storey tower by switching to a variable primary flow chilled water system
  • Produce HAP load calculations and Revit MEP models, coordinating clash detection with structural and electrical teams weekly
  • Review contractor shop drawings and material submittals, closing out comments within a 5 working day turnaround target
  • Liaise directly with DEWA and Dubai Civil Defence to secure NOC approvals, resolving two stalled submissions within one review cycle
  • Mentor two graduate engineers on duct sizing, pipe sizing and equipment schedules
Mechanical Design Engineer
A Riyadh-based engineering consultancy working on retail and office developments · Saudi Arabia
  • Designed VRF and chilled water systems for retail fit-outs and office floors ranging from 2,000 to 15,000 square metres
  • Prepared equipment schedules, specifications and BOQs for tender packages across six projects
  • Carried out ventilation and fire smoke calculations in line with Saudi Building Code and NFPA 92 requirements
  • Supported site teams during installation, resolving coordination clashes that had delayed ceiling works by two weeks
Graduate Mechanical Engineer
A mid-size MEP contractor serving commercial fit-out projects · UAE
  • Assisted senior engineers with ductwork and piping design for office fit-out projects up to 10,000 square metres
  • Carried out site surveys and as-built drawing updates for completed HVAC installations
  • Learned AutoCAD and basic HAP modelling under supervision, progressing to independent small-scope design tasks within a year
Education
BEng (Hons) Mechanical Engineering
A UK university · UK
Skills
Design and software:HAP load calculations, Revit MEP, AutoCAD MEP, Carrier/McQuay selection software, Ductsize/Pipesize tools, Navisworks clash detection
Codes and systems:ASHRAE standards, Saudi Building Code, NFPA smoke control, Chilled water and VRF systems, AHU and FCU selection, Fire and smoke extract design
Project and site:Shop drawing review, BOQ and tender preparation, Contractor coordination, Authority NOC submissions (DEWA, Dubai Civil Defence)
Certifications
Chartered Engineer progression (IMechE, working towards)
Institution of Mechanical Engineers
LEED Green Associate
U.S. Green Building Council
Languages
English
Arabic
Personal Details
Nationality: XXXX
Visa status: XXXX
Availability: XXXX
Driving licence: XXXX
XXXX XXXXX
Mechanical Design Engineer (MEP / HVAC)
[email protected]+XX XXX XXX XXXXUK
Professional Summary

Mechanical engineer with six years' experience designing HVAC and public health systems for commercial and residential buildings across the UK. Skilled in Revit MEP and IES for load modelling, with a track record of delivering RIBA Stage 3 to 5 packages on time for main contractors and clients. Comfortable coordinating with architects and structural teams to resolve clashes before they reach site, and confident presenting design options to clients directly.

Work Experience
Mechanical Design Engineer — A multidisciplinary consulting engineering practice serving commercial and residential clients · UK
  • Led mechanical design on a 180-unit residential scheme from RIBA Stage 3 through to Stage 5, keeping plant room footprint within the developer's target area
  • Produced heat loss and heat gain calculations using IES VE for a mixed-use office and retail development, supporting a BREEAM Very Good rating
  • Ran clash detection workshops in Revit with structural and architectural teams, cutting coordination RFIs on site by around 30%
  • Specified air source heat pump systems for three residential blocks, replacing gas boilers to meet Future Homes Standard requirements
  • Reviewed and signed off contractor shop drawings and plant schedules for a 12-storey commercial tower
  • Mentored two graduate engineers on CIBSE calculation methods and drawing standards
Graduate Mechanical Engineer — A regional building services engineering consultancy · UK
  • Supported senior engineers on ductwork and pipework layouts for schools and healthcare buildings using AutoCAD and Revit
  • Carried out site surveys of existing plant on refurbishment projects, feeding findings back into updated design drawings and helping senior engineers identify which systems could be retained and which needed replacement
  • Prepared pump and fan schedules for VRF and chilled water systems
  • Attended design team meetings and took on responsibility for issuing minutes and tracking actions
  • Completed CIBSE low carbon consultant training as part of the firm's graduate programme
Education
MEng Mechanical Engineering
A UK university · UK
Skills
Design and software:Revit MEP, AutoCAD, IES VE, Hevacomp, Amtech, Dialux, Navisworks
Technical:Heat loss and heat gain calculations, Ductwork and pipework sizing, ASHP and VRF system design, Plant selection and scheduling, BREEAM and Part L compliance, Clash detection and BIM coordination
Professional:CIBSE member (working towards Chartered status), Client liaison, Mentoring graduate engineers, Site surveys and condition reports
Certifications
Incorporated Engineer, working towards Chartered Engineer status
CIBSE
Low Carbon Consultant
CIBSE
Languages
English
XXXX XXXXX
Mechanical Engineer, HVAC Design and MEP Coordination
[email protected]+XX XXX XXX XXXXTX

Professional Summary

Mechanical engineer with 6 years of experience designing HVAC systems for commercial and healthcare buildings. Skilled in load calculations, equipment selection, and coordination with architects and MEP trades using Revit and Trane TRACE. Delivered projects ranging from 20,000 to 400,000 square feet, with a track record of catching clash issues before construction and keeping designs within budget. Authorized to work in the US.

Education
Bachelor of Science in Mechanical Engineering
A public university in Texas · Texas, US
Skills
Design and Analysis:Load calculations (Manual J/D, TRACE 700), HVAC system design (VAV, DOAS, chilled water, split systems), Ductwork and piping layout, Energy code compliance (ASHRAE 90.1, 62.1), Equipment selection and sizing
Software:Revit MEP, AutoCAD MEP, Trane TRACE 700, Navisworks, Bluebeam Revu
Project Skills:Construction administration, RFI and submittal review, Cross-trade coordination, Site inspections, Mentoring junior engineers
Work Experience
Mechanical Design Engineer
A regional MEP engineering consultancy serving commercial and healthcare clients · Texas, US
  • Lead mechanical design on 8 to 10 concurrent projects including outpatient clinics, office renovations, and a 150,000 square foot distribution center.
  • Run Trane TRACE 700 load calculations and equipment selection, cutting oversizing on three projects by 15 percent compared to prior designs.
  • Coordinate ductwork and piping routing in Revit with electrical and plumbing teams, resolving an average of 40 clash points per project before issue for construction.
  • Write specifications and sequences of operation for VAV, chilled water, and DOAS systems, reviewed and approved by senior engineers with minimal redlines.
  • Visit job sites during construction to verify installed equipment matches design intent and address contractor RFIs within a two day turnaround.
  • Mentor two junior engineers on load modeling and ASHRAE 62.1 ventilation compliance.
HVAC Design Engineer
A mid-size mechanical contractor and design-build firm · Texas, US
  • Designed rooftop unit and split system layouts for retail and light industrial buildings ranging from 10,000 to 60,000 square feet.
  • Performed Manual J and Manual D calculations for packaged rooftop replacements.
  • Produced construction documents and duct layouts in AutoCAD MEP, later transitioning the team workflow to Revit.
  • Supported commissioning on four building automation system startups, troubleshooting sensor and damper faults with the controls subcontractor.
  • Assisted senior engineers with energy code compliance submittals under ASHRAE 90.1 and local Texas energy code, preparing envelope and lighting schedules and running baseline models to document margin above minimum efficiency.
Certifications
Engineer in Training (EIT)
Texas Board of Professional Engineers
EPA Section 608 Certification, Universal
EPA
Languages
English

More CV examples by job · CV guides by country